Home > FAQ > About Product >

Tensile testing machine what to do routine maintenance?

Tensile testing machine what to do routine maintenance?
Update Time:2016-11-17

Tensile testing machine, also known as universal testing machine. Universal testing machine is used for a variety of materials for equipment static load, tensile, compression, bending, cutting, tearing, peeling and other mechanical properties of mechanical testing with the afterburner.

一、Body maintenance

1. Regular inspection of the jaws of the screw, if found loose, tighten in time.

2. Sliding surfaces in contact with liner plates and linings shall be kept clean and regularly coated with a thin layer of MoS2 (molybdenum disulfide) grease.

3. Regularly check the sprocket drive situation, if found to have loosening, please re-tensioning tension wheel.

二、Oil source maintenance

1. Regularly check the host and the oil source where there is oil spills, if found to have oil spills, should be promptly replaced ring or combination pad.

2. According to the use of the machine and the use of oil period, the regular replacement of oil filter and filter, replace the hydraulic oil.

3. Do not do a long test, pay attention to turn off the host power. If the machine is in stand-by mode, the changeover switch should be in the "load" position, since the solenoid is always energized if the change-over switch is in the "reverse" position and will affect the service life of the device.

三、Control system maintenance

1. Regularly check the control card and test machine cable is in good contact, if loose, should be fastened.

2. If there is a long time after the test without the machine, turn off the computer and pull out the monitoring card.

3. The interface on the controller is a one-to-one. The wrong interface may cause damage to the device.

4. The interface on the plug-in controller must be turned off to power the controller.

5. According to the use of the machine and the use of oil period, the regular replacement of oil filter and filter, the replacement of hydraulic oil, regular inspection of the host and oil source where there is oil spills, such as oil spills should be promptly replaced ring or combination pad.

Tensile testing machine

Company Profile
GESTER INSTRUMENTS CO.,LTD is professionally engaged in production and R&D of various material physical properties testing equipment. With 20 years experience in research and development, we help our customers in various fields to create the superior testing system.We’ve built the long-term cooperation relationship with SGS, Bureau Veritas,TUV and Intertek, our high quality and first-rank after-sales service help us to win the trust and approval of the customers.
Contact Person
leave a message:
Contact Now
Address:
7/F, No.15, Chifeng Road, Licheng Region, Quanzhou city of Fujian PR, 362000 China.
subscribe
Please enter your email address for our mailing list to keep your self our lastest updated.
subscription